Manual Pipe Threading Lathe Manufacturer
Likarolo tsa Mochini
1. Lathe ena e tloaelehileng ea ho roala phala ke moralo o mocha.
2. Bethe ke mohaho o ikhethang oa marako a mararo, 'me lerako le ka morao le hlophisitsoe ka letsoapo la 12 °.Bophara ba terene ea tataiso ea bethe ke 550mm.E tima molumo o phahameng haholo 'me e thehiloe ka nepo ho netefatsa ho nepahala le bophelo ba ts'ebeletso ea mochini.
3. The kakaretso gear box type spindle unit, the headstock box is the overall casting structure, ho ena le mat heightening block.
4. Tšebeliso ea ho tima lisebelisoa tsa ho sila ka mokhoa o nepahetseng le li-bearings tsa boleng bo phahameng li tiisa hore lerata la mochine le molemo.
5. Hlooho e ka sehloohong e nka mokhoa o matla oa ho potoloha o pholileng oa ho phalla ka ntle, o sa fokotseng feela ho phahama ha mocheso oa sefate se seholo, empa hape ka katleho ho boloka lebokose la hlooho le hloekile ebile le tlositsoe.
6. Seporo sa tataiso se kopantsoe le lebanta le bonolo la YT ho ntlafatsa ho nepahala ho tataisang le ho nepahala ha sesebelisoa sa mochine, 'me ka katleho ho ntlafatsa bophelo ba tšebeletso ea mochine oa mochine.
7. Sesebelisoa se seholo sa ho khanna se entsoe ke Shenyang Machine Tool Group ho netefatsa hore lerata la mochine oa mochine le molemo.
Sesebelisoa sena sa mochini se sebelisoa haholo ts'ebetsong ea li-cylinders tsa hydraulic, likarolo tse telele tsa shaft le likarolo tse fapaneng.
Tlhaloso
| Ntho | Yuniti | QL1320 | QL1323 |
| Max.ho fetola bophara ba 'mele oa mochini | mm | 630 | 630 |
| Bolelele bo boholo | mm | 1500 | 1500 |
| Max.turning diameter of Tool holder | mm | 350 | 350 |
| bophara ba Bethe | mm | 550 | 550 |
| Spindle bore | mm | 205 | 230 |
| Hlaha e meraro | mm | 205 | 230 |
| Tlhaloso ea Chuck |
| Φ500 Hlaha ea mehlahare e meraro ka letsoho | Φ500 Hlaha ea mehlahare e meraro ka letsoho |
| Lebelo la spindle | r/mets | 18-450 | 18-450 |
| Matla a motlakase a ka sehloohong | kw | 11 | 11 |
| Mochini oa khoele | Metric thread | 550 | 550 |
|
| 1-15 limilimithara | 205 | 230 |
| 21 Mefuta | 1-15 limilimithara | 205 | 230 |
| 21 Mefuta |
| Φ500 Hlaha ea mehlahare e meraro ka letsoho | Φ500 Hlaha ea mehlahare e meraro ka letsoho |
|
| Inch thread | 1-14tpi | 18-450 |
| 26 Mefuta | 1-14tpi | 11 | 11 |
| 26 Mefuta | Metric thread |
|
|
| Boholo ba leeto la longitudinal la sale | mm | 1250 | 1250 |
| Spindle center to Tool install datum | mm | 32 | 32 |
| Boholo ba karolo ea lisebelisoa | mm | 32x32 | 32x32 |
| Bophara ba sleeve ea mohatla | mm | 100 | 100 |
| Maeto a matsoho a Tailstock | mm | 250 | 250 |
| Sekoti sa tailstock taper lesoba | Mohs | 5 | 5 |
| Ho falla ka morao ho tailstock | mm | ±15 | ±15 |
| Boima ba mochini | Kg | 4500 | 4500 |
| Boholo ba mochini | mm | 3300x1450x1500 | 3300x1450x1500 |
Litšoantšo tse qaqileng
