CNC Phetoho And Milling Center TMY Series
Tlhophiso ea Sehlahisoa
Likaroloana
Ho tiea ho hoholo, ho itšeha ho boima, le botsitso bo phahameng: E nka bethe e kenyellelitsoeng, bethe e sekametseng 30 °, le moralo o motenya o matlafalitsoeng oa likhopo ho fokotsa ho khopama le ho senyeha ha mocheso.
Ho nepahala ho phahameng le karabelo e matla e phahameng: Li-bearings tsa bolo tse nepahetseng haholo li sebelisoa ka pele le ka morao ho fihlela botsitso bo phahameng ba spindle le ho nepahala ho hoholo ha li-spindle..
The spindle servo unit e nepahetse haholo ebile e bonolo ho e hlokomela.
Bokhoni bo phahameng: Lebelo le phahameng la spindle ke 4500rpm / min, mme motsamao o potlakileng o ka fihla ho 30m / min.
Litlhaloso tsa Tekheniki
| Litlhaloso tsa Tekheniki | ||
| Ntho | Tlhaloso | |
| Bethe | Bethe le setsi li entsoe ka tšepe ea boleng bo phahameng, 'me bethe e tšekaletse ho 30 °. | |
| Sebaka sa tšebetso | Bophahamo bo boholo ba ho potoloha ha bethe | 600 limilimithara |
| Boholo ba ho sebetsa ka bophara ba li-discs | 300 limilimithara | |
| Boholo ba ho sebetsa ka bophara ba pallet | 300 limilimithara | |
| Bolelele ba ho sebetsa ba bar | 500 limilimithara | |
| Boholo ba lesoba la sekoti | Φ51 limilimithara | |
| Travel Feed | Boholo ba maeto a X-axis | 300 limilimithara |
| Boholo ba maeto a Z-axis | 590 limilimithara | |
| Boholo ba maeto a Y-axis | ± 50mm(Tsoelano) | |
| Sekhahla sa lebelo la ho sisinyeha ha axis ea X/Z/Y | 30m/mots | |
| X/Z/Y screw bophara/sekontiri | 32/10 limilimithara | |
| X/Z/Y bophara ba tataiso ea mola | 35 limilimithara | |
| X-axis servo motor | β12 (e nang le mariki) | |
| Z-axis servo motor | β12 | |
| Y-axis servo motor | β12 (e nang le mariki) | |
| Servo turret motor | 3N.m | |
| Motlakase oa hlooho ea matla | β12 | |
| Nepahalo | Ho nepahala ha boemo ba axis ea X/Z | ± 0.003 limilimithara |
| Ho nepahala ho pheta-pheta axis ea X/Z | ± 0.003 limilimithara | |
| Mohatla o tsamayang | Mokoti oa letsoho la Tailstock taper lesoba/diameter | Mohs #5 |
| Tailstock falling maeto | 80-630 limilimithara | |
| Tailstock pressure range | 5 ~ 30Kg/cm2 | |
| Mokhoa oa ho tsamaea oa Tailstock | Motsamao o hlophisitsoeng oa hydraulic | |
| Spindle | Mofuta oa nko ea spindle | A2-6 |
| Hlakola ka bophara ba lesoba | Φ66 limilimithara | |
| Spindle boholo lebelo | 4500 rpm | |
| Matla a enjene ea spindle | 11KW | |
| Chuck / rotary cylinder | 8 lisenthimithara | |
| Turret | Servo powered turret | Liteishene tsa BMT55/12 |
| Boholo ba hlooho ea hlooho | 330 | |
| Litlhaloso tsa sets'oants'o sa lisebelisoa | □25×25 | |
| Sets'oants'o sa lisebelisoa tse tenang | Φ32 limilimithara | |
| 0 ° hlooho e silang ka lehlakoreng (sekotoana se le seng) | ER32/3000 rpm | |
| 90° hlooho e silang ka lehlakore (sekotoana se le seng) | ER32/3000 rpm | |
| Tse ding | Kakaretso ea bokhoni | 26KW |
| Machine tool net weight | Hoo e ka bang 4700Kg | |
| Boholo ba mochini (bolelele*bophara*bolelele) | 3050×2000×2050mm | |
Likarolo tsa Tlhophiso
Spindle
Ts'ehetsa ho itšeha ka mokhoa o nepahetseng le o boima ho eketsa tlhahiso.
Turret
E ntlafatsa ho ts'epahala ha indexing le ho netefatsa boima bo phahameng.
Tsamaiso
Standard FANUC F Oi-TF Plus CNC Sistimi, ts'ebetso e phahameng ea ts'ebetso lebelo le phahameng la ts'ebetso, bonolo ba tshebediso.
Ho Rigidity e Phahameng
Sebapali se boimaIron Base Le Likaroloana, ho monya ho matla ho ts'oenyehileng le botsitso bo phahameng.
Screw ea Ball
Boiketsiso ba screw, backlash le ho phahama ha mocheso li felisitsoe esale pele.
Roller Linear Guide
Arc cutting, bevel cutting, le mokhoa o ts'oanang oa holim'a metsi. Potoloho e phahameng ea bokahohle.
