Mekhahlelo e mehlano ea Horizontal Machining Center + CP Series
Likaroloana
Sebopeho sa Mohato oa X-axis
Phapang ea bophahamo ba sefofane se ntseng se phahama sa tataiso ea mela ea X-axis
seporo se etsa bonnete ba hore boemo ba matla ba seporo sa tataiso bo botle.
Hollow Screw
Pholiso ea sekoti sekoti se tiisa lebelo le holimo
ts'ebetso ea mochini ho boloka ho nepahala ho tsitsitseng.
High Rigidity Fuselage
Bethe e kopaneng e ka pele le e ka morao e ntlafatsa ho tiea ha bethe ea sesebelisoa sa mochini, ka hona
ho netefatsa botsitso ba ho sebetsa.
Lilepe tsa X, Y, Z Ke Tsohle Litataiso tsa Linear Roller
Lilepe tsa X, Y, Z kaofela ke litataiso tsa lirolara, ka hona, li nepahetse haholo
sekoa se boima se ka phethahala.
X,Y,Z lilepeAre AlinearRollerGuide
E le ho finyella ho nepahala ho phahameng le ho itšeha ho boima, X, Y, Z axis kaofela li sebelisa linear roller guide
45°-axis e le 'ngoeSlepheoHead
1 The swing Angle range e kholo, e ka ba -30 ° -180 ° swing Angle ea ts'ebetso ea workpiece, e loketseng ho sebetsa likarolo tsa sefofane.
2 The connguration ea A63 clamping arm swing head e ka ba
e loketseng bakeng sa ho sebetsa likarolo tse kopantsoeng tsa likoloi.
Ho tsamayaCrosbeamSsebopeho, Z-axisDoubleSbasebetsiMoveShanghang
1 Bethe / kholomo / leballo li entsoe ka tšepe e bohlooho, e khona ho monya thothomelo ka nepo.ake graphite sebopeho, e nyenyane deformation, babatsehang matla a sebopeho le rigidity.
Likarolo tse 2 tse tsamaeang li entsoe ka tšepe, ho netefatsa hore boima bo bobebe, lebelo le tsamaeang ka potlako (≥60m / min), ts'ebetso e phahameng efciency.
3 X/Y/Z axis stroke (≥1700mm), e loketseng ho sebetsa likarolo tse kholo
PrecislonClampingTkhonahala
C shaft rolara gear CAM ho felisa clearance, hoetsa bonnete ba ho nepahala ho phahameng le ho sebetsa ka mokhoa o phahameng oa ciency machining
Hollowscrew
Hollow screw coollng e netefatsa operatlon e phahameng ea mochini ho boloka ho nepahala ho tsitsitseng.
P1 45°Se sengAxisSlepheoHead
Sebopeho se thata se phahameng
Mefuta e mengata ea ts'ebetso e pharalletseng e ka fokotsa ho ts'oaroa khafetsa ha li-workpieces le ho ntlafatsa ho nepahala le ho sebetsa hantle
Boemo bo phahameng ba ho ikamahanya le maemo, khetho ea bokahohleng ea li-axis tse peli e atolosa tshebetso ea mochine, e lekanang le ho eketsa axis e khethehileng. Esita le mesebetsing e meng e meholo eo ho seng bonolo ho e khutlisa kapa e hole le litlhoko tse nepahetseng, e sebetsa ho feta ho eketsa axis ea bone.
P2 DoubleSmotshoaroaHbochabelaSlepheoHead
A-extractor e tsamaisoa ka kotloloho ke enjene ea lebelo le tlase la torque e phahameng, ntle le litšitiso, ho nepahala ho phahameng, le ts'ebetso e ntle ea karabelo e matla.
A-oli e amohela li-clamp tsa hydraulic, tse nang le matla a matla a ho koala le bophelo bo bolelele. Sebopeho se senyenyane le ketso e ka tšeptjoang
Sesebelisoa se ikhethileng sa moeli se etsa hore taolo ea hlooho e be bonolo.
High rigidity precision spindle ea motlakase, sebaka se seholo sa ho bea tumello le ho tiea ho hoholo.
P3 45°Se sengAxisSlepheoHead
Sebopeho se thata se phahameng
Mefuta e mengata ea ts'ebetso e pharalletseng e ka fokotsa ho ts'oaroa khafetsa ha li-workpieces le ho ntlafatsa ho nepahala le ho sebetsa hantle
Boemo bo phahameng ba ho ikamahanya le maemo, khetho ea bokahohleng ea li-axis tse peli e atolosa tshebetso ea mochine, e lekanang le ho eketsa axis e khethehileng. Esita le mesebetsing e meng e meholo eo ho seng bonolo ho e khutlisa kapa e hole le litlhoko tse nepahetseng, e sebetsa ho feta ho eketsa axis ea bone.
P4 DoubleSmotshoaroaHbochabelaSlepheoHead
A-extractor e tsamaisoa ka kotloloho ke enjene ea lebelo le tlase la torque e phahameng, ntle le litšitiso, ho nepahala ho phahameng, le ts'ebetso e ntle ea karabelo e matla.
A-oli e amohela li-clamp tsa hydraulic, tse nang le matla a matla a ho koala le bophelo bo bolelele. Sebopeho se senyenyane le ketso e ka tšeptjoang
Sesebelisoa se ikhethileng sa moeli se etsa hore taolo ea hlooho e be bonolo.
High rigidity precision spindle ea motlakase, sebaka se seholo sa ho bea tumello le ho tiea ho hoholo.
LaserToolSettingIseletsa
Pono e potlakileng le e nepahetseng ea boholo ba sesebelisoa ho netefatsa tšebeliso ea nako e telele ntle le ho roala
Marang-rangDetectionStsamaiso
fokotsa tlhophiso ea lisebelisoa le nako ea ho loants'a mosebetsi, 'me u boloke 90% ea nako e thusang.
OliMistGatheringStsamaiso
Puri e phahamengboiqapelosekhahla sa cation, ts'ebetso e tsitsitseng, lerata le khutsitsengfloor.Ka katlehofiHlakola moea o qhibilihang ka metsing le mosi oa oli ka har'a workshop 'me u hloekise moea ka botebo.
Ho pomaFluidColingDevice
Tsamaiso e ka etsa bonnete ba ho phahama ha mocheso oa ho itšehafluid ka hare ho 3-5 ℃.
AxialGtekanyetsoRuler
Letšoao la tlhahiso e lekantsoeng ke digital pulse, e nang le litšobotsi tsa mefuta e mengata ea ho lemoha, ho nepahala ho holimo le lebelo la karabo e potlakileng.
E robehileSesebelisoa DetectionIn The Makasine
Karolo ea ho lemoha e kentsoe sesebelisoamakasine, 'me mokhoa oa ho lemoha le mokhoa oa ho sebetsa o etsoa ka nako e le' ngoe, ntle le ho ama ho otla ha ho sebetsa.
Litafole tsa mosebetsi
StandardRletsaSingle-stationWbenche ea ork
Tafole ea Rotary e nang le phetiso ea khamera ea rolara
Ho sebetsa ka mokhoa o phahameng, ha ho na ho khutlela morao, ha ho na tlhokomelo, ho thatafala haholo le mojaro o boima.
Tafole ea Rotary e nang le bonyane ba indexing ba 0.001°
Taba ea boikhetheloDoubleExchangeDoubleStationWbenche ea ork
Khokahano lipakeng tsa 'mele o sebetsang le phalete e tiisitsoe ke khoune ea lintlha tse 4 e sebelisang matla a ho tiisa pallet.
The worktable clamping force e boloka ts'ebetso e tsitsitseng bakeng sa ho itšeha ho boima.
ATC
E ka sebelisoa bakeng sa bar e telele e tenang le ho sila bar e kholo ea bophara ho ntlafatsa katleho ea tlhahiso.
Sesebelisoa se bonolo empa se ka tšeptjoang haholo sa cam se fetolang sesebelisoa
e ka hlokomela ho fetoha ha sesebelisoa ka lebelo le phahameng le ho tsitsa ka nako e telele
ts'ebetso ea ho fokotsa nako e sa lebelloang.
Litlhaloso tsa Tekheniki
| Morero | Yuniti | CP800 | CP800T2 | |
| Tsamaea | X/Y/Z maeto a axis | mm | 800x800x750 | 800x800x750 |
| B axis maeto | -30°-160° | -30°-160° | ||
| C axis maeto | 360° | 360° | ||
| Sebaka ho tloha ho spindle ho ea holim'a tafole (B axis 90 degrees tse tshekaletseng) | mm | 290-1040 | 160-910 | |
| Sebaka ho tloha ho spindle ho ea holim'a tafole (B axis 0 degrees tse otlolohileng) | mm | 47-797 | -83-667 | |
| Sebaka ho tloha ho spindle ho ea setsing sa tafole (B axis 90 degrees tse tshekaletseng) | mm | -135-665 | -135-665 | |
| Sebaka ho tloha ho spindle ho ea setsing sa tafole (B axis 0 degrees ft) | mm | 108-908 | 108-908 | |
| Boholo ba ho sebetsa | mm | φ720*910 | φ720*910 | |
| Phepelo ea li-axis tse tharo | X/Y/Z axis e falla ka potlako | m/m | 60/60/60 | 60/60/60 |
| Ho fokotsa lebelo la phepelo | mm/min | 0-24000 | 0-24000 | |
| Tafole ea Rotary (C axis) | Palo ea litafole tsa mosebetsi | 1 | 2 | |
| Disk bophara | mm | φ650 | 500*500 | |
| Mojaro o lumelletsoeng | kg | 500 | 500 | |
| Lebelo le phahameng la ho potoloha | rmp | 40 | 40 | |
| Ho beha maemo/pheta bonnete | arc.sec | 15/10 | 15/10 | |
| B axis | Lebelo le phahameng la ho potoloha | rmp | 60 | 60 |
| Ho beha maemo/pheta bonnete | arc.sec | 8/4 | 8/4 | |
| Spindle | Litlhaloso tsa spindle (diameter ea ho kenya / mokhoa oa phetisetso) | mm | 190/ E ahiloe | 190/ E ahiloe |
| Spindle taper | mm | A63 | A63 | |
| Spindle boholo lebelo | r/mets | 18000 | 18000 | |
| Matla a spindle (a tsoelang pele/S640%) | kW | 30/35 | 30/35 | |
| Spindle motor torque (e tsoelang pele/S640%) | Nm | 72/85 | 72/85 | |
| Makasine ea lisebelisoa | Tool magazine bokgoni | 50T | 50T | |
| Nako ea ho fetola lisebelisoa (TT) | S | 7 | 7 | |
| Boholo ba bophara ba sesebelisoa (sesebediswa se felletseng/sesebediswa se se nang letho) | mm | 80/150 | 80/150 | |
| Boholo ba bolelele ba sesebelisoa | Mm | 450 | 450 | |
| Boholo ba boima ba sesebelisoa | kg | 8 | 8 | |
| Guide seporo | Seporo sa tataiso ea X-axis (boholo/palo ea li-slide) | mm | 45/2 | 45/2 |
| Seporo sa tataiso ea Y-axis (boholo/palo ea li-slide) | mm | 45/3 | 45/3 | |
| Seporo sa tataiso ea Z-axis (boholo/palo ea li-slide) | mm | 45/2 | 45/2 | |
| Tphetiso ea hree-axis | X-axis screw | N | 2R40x20 | 2R40x20 |
| Y-axis screw | N | 2R40x20 | 2R40x20 | |
| Z-axis screw | N | 2R40x20 | 2R40x20 | |
| Tho nepahala ha hree-axis | Ho beha ho nepahala | mm | ±0.005/300 | ±0.005/300 |
| Pheta ho nepahala ha maemo | mm | ±0.003/300 | ±0.003/300 | |
| Sistimi ea ho tlotsa | Lubrication unit capacity | L | 0.7 | 0.7 |
| Mofuta oa lubrication | Ho tlotsa ka mafura | Ho tlotsa ka mafura | ||
| Tse ding | Litlhoko tsa moea | kg/cm² | ≥6 | ≥6 |
| Phallo ea mohloli oa moea | mm³/min | ≥0.5 | ≥0.5 | |
| Boima ba mochini | KG | 10.5 | 11 | |
| Morero | Yuniti | CP1100 | CP1100T2 | |
| Tsamaea | X/Y/Z maeto a axis | mm | 980x1140x680 | 980x1140x500 |
| B axis maeto | -30°-180° | -30°-180° | ||
| C axis maeto | 360° | 360° | ||
| Sebaka ho tloha ho spindle ho ea holim'a tafole (B axis 90 degrees tse tshekaletseng) | mm | 100-780 | 100-600 | |
| Sebaka ho tloha ho spindle ho ea holim'a tafole (B axis 0 degrees tse otlolohileng) | mm | 0-680 | 0-500 | |
| Sebaka ho tloha ho spindle ho ea setsing sa tafole (B axis 90 degrees tse tshekaletseng) | mm | -260-720 | -260-720 | |
| Sebaka ho tloha ho spindle ho ea setsing sa tafole (B axis 0 degrees ft) | mm | -160-820 | -160-820 | |
| Boholo ba ho sebetsa | mm | φ1120*780 | φ1120*600 | |
| Phepelo ea li-axis tse tharo | X/Y/Z axis e falla ka potlako | m/m | 60/60/60 | 60/60/60 |
| Ho fokotsa lebelo la phepelo | mm/min | 0-24000 | 0-24000 | |
| Tafole ea Rotary (C axis) | Palo ea litafole tsa mosebetsi | 1 | 2 | |
| Disk bophara | mm | φ800 | 630*630 | |
| Mojaro o lumelletsoeng | kg | 1200 | 1000 | |
| Lebelo le phahameng la ho potoloha | rmp | 30 | 30 | |
| Ho beha maemo/pheta bonnete | arc.sec | 15/10 | 15/10 | |
| B axis | Lebelo le phahameng la ho potoloha | rmp | 50 | 50 |
| Ho beha maemo/pheta bonnete | arc.sec | 8/4 | 8/4 | |
| Spindle | Litlhaloso tsa spindle (diameter ea ho kenya / mokhoa oa phetisetso) | mm | 230/ E ahiloe | 230/ E ahiloe |
| Spindle taper | mm | A100 | A100 | |
| Spindle boholo lebelo | r/mets | 10000 | 10000 | |
| Matla a spindle (a tsoelang pele/S640%) | kW | 54/65 | 54/65 | |
| Spindle motor torque (e tsoelang pele/S640%) | Nm | 200/230 | 200/230 | |
| Makasine ea lisebelisoa | Tool magazine bokgoni | 50T | 50T | |
| Nako ea ho fetola lisebelisoa (TT) | S | 8 | 8 | |
| Boholo ba bophara ba sesebelisoa (sesebediswa se felletseng/sesebediswa se se nang letho) | mm | 120/240 | 120/240 | |
| Boholo ba bolelele ba sesebelisoa | Mm | 450 | 450 | |
| Boholo ba boima ba sesebelisoa | kg | 15 | 15 | |
| Guide seporo | Seporo sa tataiso ea X-axis (boholo/palo ea li-slide) | mm | 55/2 | 55/2 |
| Seporo sa tataiso ea Y-axis (boholo/palo ea li-slide) | mm | 55/3 | 55/3 | |
| Seporo sa tataiso ea Z-axis (boholo/palo ea li-slide) | mm | 55/2 | 55/2 | |
| Tphetiso ea hree-axis | X-axis screw | N | 2R50x20 | 2R50x20 |
| Y-axis screw | N | 2R50x20 | 2R50x20 | |
| Z-axis screw | N | 2R50x20 | 2R50x20 | |
| Tho nepahala ha hree-axis | Ho beha ho nepahala | mm | 0.005/300 | 0.005/300 |
| Pheta ho nepahala ha maemo | mm | 0.003/300 | 0.003/300 | |
| Sistimi ea ho tlotsa | Lubrication unit capacity | L | 0.7 | 0.7 |
| Mofuta oa lubrication | Ho tlotsa ka mafura | Ho tlotsa ka mafura | ||
| Tse ding | Litlhoko tsa moea | kg/cm² | ≥6 | ≥6 |
| Phallo ea mohloli oa moea | mm³/min | ≥0.5 | ≥0.5 | |
| Boima ba mochini | KG | 23 | 24 | |
| Morero | Yuniti | CP1600 | CP1600T2 | |
| Tsamaea | X/Y/Z maeto a axis | mm | 1550x1540x1115 | 1550x1540x940 |
| B axis maeto | -30°-180° | -30°-180° | ||
| C axis maeto | 360° | 360° | ||
| Sebaka ho tloha ho spindle ho ea holim'a tafole (B axis 90 degrees tse tshekaletseng) | mm | 100-1215 | 100-1040 | |
| Sebaka ho tloha ho spindle ho ea holim'a tafole (B axis 0 degrees tse otlolohileng) | mm | 0-1115 | 0-940 | |
| Sebaka ho tloha ho spindle ho ea setsing sa tafole (B axis 90 degrees tse tshekaletseng) | mm | -160-1290 | -160-1290 | |
| Sebaka ho tloha ho spindle ho ea setsing sa tafole (B axis 0 degrees ft) | mm | -60-1390 | -60-1390 | |
| Boholo ba ho sebetsa | mm | φ1490*1215 | φ1490*1040 | |
| Phepelo ea li-axis tse tharo | X/Y/Z axis e falla ka potlako | m/m | 42/42/42 | 42/42/42 |
| Ho fokotsa lebelo la phepelo | mm/min | 0-24000 | 0-24000 | |
| Tafole ea Rotary (C axis) | Palo ea litafole tsa mosebetsi | 1 | 2 | |
| Disk bophara | mm | φ1200 | 800*800 | |
| Mojaro o lumelletsoeng | kg | 2000 | 1800 | |
| Lebelo le phahameng la ho potoloha | rmp | 20 | 20 | |
| Ho beha maemo/pheta bonnete | arc.sec | 15/10 | 15/10 | |
| B axis | Lebelo le phahameng la ho potoloha | rmp | 50 | 50 |
| Ho beha maemo/pheta bonnete | arc.sec | 8/4 | 8/4 | |
| Spindle | Litlhaloso tsa spindle (diameter ea ho kenya / mokhoa oa phetisetso) | mm | 230/ E ahiloe | 230/ E ahiloe |
| Spindle taper | mm | A100 | A100 | |
| Spindle boholo lebelo | r/mets | 10000 | 10000 | |
| Matla a spindle (a tsoelang pele/S640%) | kW | 54/65 | 54/65 | |
| Spindle motor torque (e tsoelang pele/S640%) | Nm | 200/230 | 200/230 | |
| Makasine ea lisebelisoa | Tool magazine bokgoni | 50T | 50T | |
| Nako ea ho fetola lisebelisoa (TT) | S | 8 | 8 | |
| Boholo ba bophara ba sesebelisoa (sesebediswa se felletseng/sesebediswa se se nang letho) | mm | 120/240 | 120/240 | |
| Boholo ba bolelele ba sesebelisoa | Mm | 450 | 450 | |
| Boholo ba boima ba sesebelisoa | kg | 15 | 15 | |
| Guide seporo | Seporo sa tataiso ea X-axis (boholo/palo ea li-slide) | mm | 65/2 | 65/2 |
| Seporo sa tataiso ea Y-axis (boholo/palo ea li-slide) | mm | 55/3 | 55/3 | |
| Seporo sa tataiso ea Z-axis (boholo/palo ea li-slide) | mm | 55/2 | 55/2 | |
| Tphetiso ea hree-axis | X-axis screw | N | 55x16 | 55x16 |
| Y-axis screw | N | 55x16 | 55x16 | |
| Z-axis screw | N | 2R50x20 | 2R50x20 | |
| Tho nepahala ha hree-axis | Ho beha ho nepahala | mm | 0.005/300 | 0.005/300 |
| Pheta ho nepahala ha maemo | mm | 0.003/300 | 0.003/300 | |
| Sistimi ea ho tlotsa | Lubrication unit capacity | L | 0.7 | 0.7 |
| Mofuta oa lubrication | Ho tlotsa ka mafura | Ho tlotsa ka mafura | ||
| Tse ding | Litlhoko tsa moea | kg/cm² | ≥6 | ≥6 |
| Phallo ea mohloli oa moea | mm³/min | ≥0.5 | ≥0.5 | |
| Boima ba mochini | KG | 30 | 31 | |
| Morero | Yuniti | CP2000 | CPCP2000V2V | |
| Tsamaea | X/Y/Z maeto a axis | mm | 2000x1700x1400 | 1700x1750x1700 |
| B axis maeto | -30°-180° | -30°-160° | ||
| C axis maeto | 360° | 0-360° | ||
| Sebaka ho tloha ho spindle ho ea holim'a tafole (B axis 90 degrees tse tshekaletseng) | mm | 100-1500 | -43-1657 | |
| Sebaka ho tloha ho spindle ho ea holim'a tafole (B axis 0 degrees tse otlolohileng) | mm | 0-1400 | 200-1900 | |
| Sebaka ho tloha ho spindle ho ea setsing sa tafole (B axis 90 degrees tse tshekaletseng) | mm | -1000-1000 | -57-1643 | |
| Sebaka ho tloha ho spindle ho ea setsing sa tafole (B axis 0 degrees ft) | mm | -900-1100 | -300-1400 | |
| Boholo ba ho sebetsa | mm | φ1680*1500 | φ1700*1900 | |
| Phepelo ea li-axis tse tharo | X/Y/Z axis e falla ka potlako | m/m | 60/60/60 | 60/90/90 |
| Ho fokotsa lebelo la phepelo | mm/min | 0-24000 | 0-24000 | |
| Tafole ea Rotary (C axis) | Palo ea litafole tsa mosebetsi | 1 | 1 | |
| Disk bophara | mm | φ1600 | 800*800 | |
| Mojaro o lumelletsoeng | kg | 3000 | 1500 | |
| Lebelo le phahameng la ho potoloha | rmp | 20 | 60 | |
| Ho beha maemo/pheta bonnete | arc.sec | 10/6 | 8/4 | |
| B axis | Lebelo le phahameng la ho potoloha | rmp | 50 | 60 |
| Ho beha maemo/pheta bonnete | arc.sec | 8/4 | 8/4 | |
| Spindle | Litlhaloso tsa spindle (diameter ea ho kenya / mokhoa oa phetisetso) | mm | 230/ E ahiloe | 190/ E ahiloe |
| Spindle taper | mm | A100 | A63 | |
| Spindle boholo lebelo | r/mets | 10000 | 18000 | |
| Matla a spindle (a tsoelang pele/S640%) | kW | 54/65 | 30/35 | |
| Spindle motor torque (e tsoelang pele/S640%) | Nm | 200/230 | 70/85 | |
| Makasine ea lisebelisoa | Tool magazine bokgoni | 50T | 50T | |
| Nako ea ho fetola lisebelisoa (TT) | S | 8 | 7 | |
| Boholo ba bophara ba sesebelisoa (sesebediswa se felletseng/sesebediswa se se nang letho) | mm | 120/240 | 80/150 | |
| Boholo ba bolelele ba sesebelisoa | Mm | 450 | 450 | |
| Boholo ba boima ba sesebelisoa | kg | 15 | 8 | |
| Guide seporo | Seporo sa tataiso ea X-axis (boholo/palo ea li-slide) | mm | 55/3 | 55/3 |
| Seporo sa tataiso ea Y-axis (boholo/palo ea li-slide) | mm | 45/3 | 45/3 | |
| Seporo sa tataiso ea Z-axis (boholo/palo ea li-slide) | mm | 55/2 | 55/2 | |
| Tphetiso ea hree-axis | X-axis screw | N | 63 × 25 | 63 × 25 |
| Y-axis screw | N | 50×25 | 50 × 32 | |
| Z-axis screw | N | 50*25*2 | 50*32*2 | |
| Tho nepahala ha hree-axis | Ho beha ho nepahala | mm | 0.005/300 | 0.005/300 |
| Pheta ho nepahala ha maemo | mm | 0.003/300 | 0.003/300 | |
| Sistimi ea ho tlotsa | Lubrication unit capacity | L | 0.7 | 0.7 |
| Mofuta oa lubrication | Ho tlotsa ka mafura | Ho tlotsa ka mafura | ||
| Tse ding | Litlhoko tsa moea | kg/cm² | ≥6 | ≥6 |
| Phallo ea mohloli oa moea | mm³/min | ≥0.5 | ≥0.5 | |
| Boima ba mochini | KG | 42 | 42 | |
Re romelle molaetsa oa hau:
Lihlopha tsa lihlahisoa
-
Setsi sa machining sa li-axis tse hlano tsa PM-U
-
Setsi sa machining sa li-axis tse hlano tsa PM-GU
-
Li-axis tse hlano tsa ho sila le ho fetola mochini oa FH letoto
-
Li-axis tse hlano tsa Vertical Machining Center CTB Series
-
Litsi tse hlano tsa Gantry Machining Center GT Series
-
Five-axis Horizontal Machining Center+A Series